5 Ways to Know If You Really Need to Buy New Tyres or Not?

When the tyres lose their life, they start to wear out, and it’s challenging to maintain air pressure in them. Old tyres increase your fuel costs and affect the vehicle’s braking system, which becomes a huge safety concern.

Usually, popular brands recommend that you change your tyres every ten years. Still, they might ask for a replacement sooner depending on them. Therefore; you must know when to get a replacement, here’s a guide to help you assess your tyres’ condition.

Measure the Tread Depth

Treads are the unique designs engraved on your tyres. They help lock the tyre on the road to maintain the grip of the vehicle. If the Economy Tyres Newcastle start losing the tread, it gets difficult to control the vehicle on the slope or slippery roads.

It is very easy to check the depth, just take a scale that has millimetre markings on it and place it inside the tread and note the observation. If the reading is lower than the recommended level of depth, it’s time to get new tyres.

Modern-day tyres come with depth indicators; they are usually the bars that are marked in the tread. The bars are not visible initially, but as the tyre starts to wear down, they start to appear. If you see more than two bars on the tread, it’s time for a replacement.

Inspect the sidewall

Sidewalls suffer a lot of damage when a car is driven on patchy or rough roads. The best way to analyze the condition of the sidewall is to look for cracks. If sidewall damage cases, the tyres generally look in perfect shape; therefore, you must observe closely.

Cracks make the sidewall weak, making it risky when the car is speeding on the highway because there’s a higher chance of tyres bursting. So, if there are visible cracks or patches, it would be best to replace the tyres.

Look out for other deformities

Do a thorough analysis of all the tyres and look for any other damage that may have been caused. Usually, when a tyre is overused, blisters start to appear at a point, these blisters are their weak points. On a hot summer day, you run a greater risk of these blisters bursting out, therefore, to avoid this situation, replace your tyres as soon as you spot them.

If you spot a sharp object stuck in one of your Car Tyres Newcastle, then note the width of that object. If it is wider than 2mm, then instead of repairing your tyre just go for the replacement. When you seal a hole larger than 2mm, you run a risk of a tyre bursting out soon.

Observe the irregularity in vibration

When driving on a rough road, the unusual vibration felt in the cabin is very common. If the tyres have worn out, you will notice that the vehicle is shaking a bit more than usual. This usually happens when the tyres’ outer wall has become weak, and they can’t bear the additional load. This is a very good indicator to know that the tyres must be replaced soon.

Sometimes, due to the uneven balancing and alignment also the irregular vibrations occur, if this happens, then it is best to drive up to the nearest garage and have an expert take a look.

Check the manufacturing date

The average lifespan of a good quality tyre is ten years from the date of manufacturing. To know when your tyre was produced, just look for the 4-digit code on the sidewall. The first two digits denote the month, and the last two are the year of manufacturing.

If the due time has lapsed, it is advised that you replace your tyres irrespective of the current condition.

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button