Computers and TechnologyGadgets & Accessories

How to Fix an iPhone Stuck on the Apple Logo?

Oh No! Your iPhone gets stuck on the Apple logo. 

Don’t worry! Maybe it’s just taking a long time to reach the Home screen!

No, then what to do?

Everything was fine until your iPhone rebooted. However, the situation turns upside down when you quickly realize something isn’t right. Maybe you get tired of resetting your iPhone and plugging it into your computer, but nothing shows any outcome.

Such a scenario can knock on the door at any time, especially when something went wrong during an update or data transfer, software issues, physical damage, and even liquid damage that generates the iPhone boot loop issues. Doesn’t matter – what was the reason? At last, it’ll make you desperate and frustrated to fix it. 

iPhone Repair is the only solution to get rid of such a problem. With the advancement of technology, it becomes quite easy to hire professional technicians or go through some simple tips and tricks to resolve the problems within a limited period of time.

So, what actions should you take into account if an iPhone is stuck on the Apple logo during the boot-up process?

The following write-up will show the appropriate recommendations. Let’s have a look!

Table of Content

Why Did Your iPhone Stick to the Apple Logo?

  • Upgrade Issue
  • Performing DIY Techniques
  • Restoration and Updates
  • Hardware Damages
  • Liquid Damages
  • Software Issues

What to Do If Your iPhone Stuck on the Apple Logo?

  • Force Restart Your iPhone
  • Reinstall iOS
  • Use System Repair Software
  • Perform a Factory Restore
  • Hire Apple Store Technician to Get It Repaired

Get Rid of Apple Logo Problem

Why Did Your iPhone Stick to the Apple Logo?

Although an iPhone stuck on the Apple logo is a stressful situation and you’re wondering what caused the problem. Understanding the catalyst for the problem enables you to discover a reliable solution for this. Technical and physical damage issues are some basic reasons for the iPhone boot loop, iPhone black screen of death, and iPhone stuck on apple logo. 

Let’s identify in detail the most common reasons that make your iPhone get stuck on Apple Logo:

  • Upgrade Issue

Sometimes, an upgrade in the OS software leads to such problems. The further reasons for this could be multiple. However, the iPhone device is usually down when you’re trying to install the newest iOS on an older phone. 

  • Performing DIY Techniques

Trying to perform different jailbreak or DIY techniques yourself tends to make your device get stuck on the Apple logo. Even hiring a non-professional technician might end up paying a high cost for repairing it back. 

  • Restoration and Updates

Doesn’t matter – whether you’re attempting to restore data from iTunes or iCloud, it makes your device get stuck on the Apple screen. During installing an update or performing a regular restore, your iPhone fails to display the Home screen.  

  • Hardware Damages

An accidental drop or fall can cause internal hardware damage, which will also leave an impact on your iPhone. It’ll be the reason that your iPhone isn’t displaying the Home screen. 

  • Liquid Damages

Liquid spills aren’t good for an electronic device. They usually harm the internal structure of the devices. Even a small droplet can affect the internal hardware, often leaving you with that annoying Apple logo that just won’t move.

  • Software Issues

One of the most common reasons for the iPhone being stuck on the Apple logo is – software issues. A failed update, using an older iOS version, or jailbroken techniques – all could become the causes. 

What to Do If Your iPhone Stuck on the Apple Logo?

The availability of Internet and data recovery and repair professionals come up with several techniques for the iPhone white screen death and how to fix it. 

Yes, you heard us right!

There is a solution to all problems. Below we’re going to mention some repair tips that help in reviving your iPhone device. 

  • Force Restart Your iPhone

The first and most applicable solution is to try to restart your iPhone forcefully. This might help in resolving the problem. However, always remember that every iPhone model has certain criteria to restart them. 

If you’re an iPhone 6S or iPhone SE user, press and hold the Home button and the Sleep/Wake button at the same time. You have to hold them for a while until the phone reboots and the Apple logo reappears. Now, leave both buttons at the same time 

An iPhone 7, and iPhone 7 Plus user have to press and hold the Side button and the volume down button for a time until the Apple logo disappears. Once the logo appears, don’t hold on to these two buttons and leave them. 

For iPhone 8 and further models’ users, they have to press and release the volume up button and do the same thing with the volume down button. Now, press the hold the Side button. Holding the side button until your screen goes black and the Apple logo reappears. You need to do this in the correct order. Following this rebooting phase solves most scenarios. This will reboot and won’t get stuck in a boot loop again.  

  • Reinstall iOS

If “force restart” fails to show any result, it’s time to jump to another solution i.e. try reinstalling iOS. Maybe your phone was interrupted in between an update causing iOS to become corrupt. 

So, it’s advisable for you to connect your phone to a PC and locate it on your computer. Now, repeat the above-mentioned instructions of “force restart” until the Recovery Mode screen appears. 

This will appear as a computer icon. Once you get the update or restore options, prefer Update. Thus, your PC will download and reinstall iOS without deleting your data.

  • Use System Repair Software

If you still fail to reach the desired result, consider using paid and free versions of system repair programs. These programs tend to resolve the problems within a limited period and provide assistance in turning on your Apple device again. 

There are numerous iOS system recovery programs available in the market, including Tenorshare, iMyFone, Reiboot, TunesKit, and FonePaw.

  • Perform a Factory Restore

If your iPhone isn’t turning on, it’s time to perform a factory restore. This action will erase all the data available on your phone. However, before doing a factor restoration, it’s advisable to take a backup of your phone’s data on your computer or iCloud. Otherwise, you might end up losing all your essential data. 

For completing a factory restore, follow the instructions up to Recovery Mode as described in the previous sections. But, instead of choosing the Update option, you have to now select the Restore option on your computer.

  • Hire Apple Store Technician to Get It Repaired

If you’re exhausted with all the above-mentioned options, it’s time to visit an Apple store. These stores are equipped with reliable and experienced professionals who are well aware of different techniques and methods to fix an iPhone stuck on the Apple logo. 

For example, the experts of Apple Repair in Singapore are well-versed with appropriate skills and knowledge and provide guarantees in fixing the problems within a limited time frame. 

Another beneficial part is – if your iPhone is still under warranty, Apple will repair your device for free, provided it isn’t damaged in any other way. These technicians first diagnose the problem and repair them accordingly whether it’s related to hardware or software. 

Get Rid of Apple Logo Problem

Hopefully, you become successful in fixing the issues related to your iPhone’s Apple logo. Now, you know the solutions and, of course, you never get stuck in such a situation. If you get stuck, you know – what’s the solution and where to go.

The write-up also contains a number of tips and techniques to fix the problems. Hope, these solutions assist you in the right direction.

And if you’re looking for a repair shop, search with “Phone Repair Shop Near Me”. You’ll find top solutions that assure you with high-quality services.

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button