5 Steps To Extracting Oil From Plants for Your Product Line

5 Steps To Extracting Oil From Plants for Your Product Line

Have you ever wondered what it takes to source and extract essential oils?

There are various steps involved in sourcing and creating essential oil products. The process begins with growing the plants. After harvesting and distilling the plants, the oils are then tested, labeled, and preserved.

If you are interested in learning more about the steps when extracting oil for your product line, then keep reading for comprehensive information about essential oils and how REQ steps in to help.

1. Solvent Extraction

There are various ways to extract oil from plants, but solvent extraction is one of the most effective methods. This process involves using a solvent to extract the oil from the plant material. The solvent is then removed, leaving the oil behind.

The plant material is soaked in the solvent. If you’re looking for closed loop extractors for sale, BVV has the perfect solution for you, and they carry closed-loop extraction systems for butane and propane extraction and more.

2. Supercritical Fluid Extraction

There are many methods, but we recommend using supercritical fluid extraction. This process is gentle and efficient, and it preserves the quality of the oil. After the extraction process is complete, the last step is to filter the oil to remove any impurities.

The filtered oil is then ready to be used in your product line.

3. Carbon Dioxide Extraction

The plant’s material is placed into a chamber where carbon dioxide is pumped in at high pressure. This high-pressure carbon dioxide extracts the oil from the plant material.

The oil and carbon dioxide mixture is then passed through a series of filters to remove impurities. Finally, the oil is collected and bottled for your product line.

4. Steam Distillation

Steam distillation involves passing steam through the plant material. The heat from the steam breaks down the plant cells and releases the oils. The oils and steam then travel through a condenser, where they are cooled, and the oils are collected.

5. Subcritical Water Extraction

This method uses water at temperatures below the critical point, which is the temperature at which water changes from a liquid to a gas. This method is less expensive and uses less energy than other methods, such as supercritical fluid extraction.

The plant material is first placed in a container. Water is then added, and the mixture is heated to the desired temperature. The mixture is then cooled, and the oil is separated from the water.

Make Extracting Oil Possible

In conclusion, there are a few steps to extracting oil from plants for your product line. Choose the right plant. You need to extract the oil using a safe and effective method. You need to purify the oil to remove impurities.

Finally, you need to test the oil to ensure its quality. By following these steps, you can ensure that you produce a high-quality product that meets your customer’s needs.

For more information on ingredients and extraction, check out the rest of our blog.

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button