FeaturedHome Improvement

5 Common Plumbing Problems You Can Fix Yourself

Blocked Drain

Plumbing is one of the most important aspects of construction and planning. It primarily entails the construction of a water supply for proper sanitation and a drainage system, such as sewer pipes. None of us will ever like these plumbing systems draining water all around. That’s when our plumbers come to rescue us as heroes to resolve your plumbing problems Plumbing repair

While most of the plumbing issues should be handled only by a licenced plumber, there are some popular plumbing issues that you can handle yourself. Below, we’ll take you through some of these problems. Look for local plumbing experts, if you’re still having problems after following our DIY steps. Don’t let a plumbing problem ruin your day; instead, plan ahead to avoid it.

Jammed Garbage Disposal

Small objects can get easily stuck in the garbage disposal system. For instance, the pop-top from a soda can is the most popular culprit. However, you can fix it easily if you take proper precautions and make use of the right equipment. The very first step is to switch off the power. You can get severely injured if the disposal system starts working while you’re working on it. 

Next, you will need an Allen Wrench. One will most likely be connected to the garbage disposal’s engine. The Allen wrench can be inserted into the bottom of the device to manually switch the disposal blades. This will easily free the blades and the system will now be available for use again. Remove the Allen wrench and restore power to see if the plumbing problem has been solved. If not, calling a professional plumber will be the best option. 

Clearing a Drain Blockage

Is water draining slowly or making a gurgling noise? It’s all because you have a blocked drain. Along with a gurgling noise, you can also sense an unpleasant odour. Let’s clear the drain blockage by first searching for the blockage. Once you detect it, you will be able to remove it easily.  A long, thin object, such as a wire hanger, may be used to remove solid objects from the shower drain, such as clumped hair and soap. Very hot water and a small amount of detergent can liquefy softer products, such as fat in the kitchen sink.

When you can’t figure out where the blockage is coming from, expert Plumber Wollongong can guide you through some options for removing clogged drains, Plumbing repair including using a baking soda and vinegar solution. To be specific, the instructions above are only for clearing a blockage in a single drain, not your entire plumbing system. 

Dealing with Common Toilet Issues

The most popular toilet problem that does not necessitate professional assistance is a toilet that does not flush properly. This happens when the tank isn’t completely full before flushing, or when the flushing mechanism is faulty or damaged.

Begin by opening the cistern lid and remove all the blockages that prevent the tank from filling. Frequently, the issue arises only when the flushing mechanism’s chain has broken loose. Simply reattach it if this is the case. However, if the toilet is more than five years old, the mechanism might need to be replaced. If you have an older toilet, you may even need to repair the entire valve or the entire cistern.

It’s probably time to call a local plumber in Wollongong, if you can’t find the root of the problem or if you’ve fixed it before but it keeps happening. There’s probably a crack or a leak, and the more you fiddle with it, the worse the problem will get.

Repairing a Leaky Faucet

Facing a Tap Leak? You can easily repair the leaks and wouldn’t even take more than an hour. Start by turning on the leaky tap and turn it off by using the shut-off valve (typically located under the sink). Turn the tap back on to lower the pressure. This will also ensure that the water has been properly turned off.

We can now easily disassemble the tap. Remember to hold the bits in the same order as you are removing them. You’ll be happy you did this when it’s time to put it back together. Within the tap look for any mineral deposit. Mineral deposits can easily be loosened with the help of a little vinegar. Then, reassemble the tap by replacing any worn or damaged bits. Enable the water to run for a few moments after turning it back on to extract all air from the pipes Plumbing repair

Fixing a Low Water Pressure

When a nozzle has low water pressure, such as a slow dribble, it may indicate a serious problem. It could, however, be a simple problem that you can resolve on your own. 

Particularly if you keep things under the sink, check the shut-off valve first, Remove all the things and double-check that the valve is turned on. If it isn’t the case, there could be a small blockage. Start by cleaning each chamber of the faucet, which will eliminate any blockages or buildup . 

After cleaning, if you reassemble the faucet and still have low water pressure, consult a licensed plumber, as this may indicate a more serious problem. Even, don’t be afraid to ask experts from Plumber Wollongong, if you have any plumbing questions! The professional plumbing team at plumber Wollongong reach to you in time at your doorstep to rescue you from all the plumbing issues in case you fail to resolve the by yourself.

Plumbing Problems You Can Handle

We want to stress that plumbing is a difficult task for the average citizen. Most people dislike having their hands dirty in order to solve their problems. However, there are a few fixes that you can make without making things worse. If you’re going to try some above DIY tutorials, make sure to follow these steps:

  • Before you do something, turn off the main water source.
  • Use only proper equipment and tools – Don’t rely on cheap ones.
  • Wear nothing that you don’t want to get dirty.
  • If you don’t understand anything, call a plumber for help.

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button